Wacom Cintiq 24HD touch User Manual page 142

5. Adjust the incline levers
mounting screws that came with your product to secure the support arm brackets to the pen display.
There are 4 Phillips screws per support arm bracket. Do not overtighten or strip the screw threads.
Warning
Do not operate the incline levers unless the display support arms are roughly located within their mounting
brackets and you are placing some amount of leverage on the support arms to hold them in place.
The incline levers are spring-loaded and may cause injury or damage if released without weight on the
stand support arms. Improper operation may lead to physical injury or damage to the stand.
Avoid catching your finger in the gaps of the movable portions of the stand.
6. Set the assembled unit on the stand base. Check for stability of the support arms. Carefully move the
pen display and stand through their full range of motion. See
Contents Index
as needed for a proper, flush fit on both arm brackets. Use the appropriate
Contents Index
adjusting display height and
142
incline.
142