Wacom Cintiq 24HD touch User Manual page 12

Cintiq cabling diagram
Connection cables are pre-installed.
DVI-D. Connector located at display stand base.
•
• DisplayPort. Remove cover to access cable. See
• VGA. Requires removal of DVI-D cable and replacement with the provided
DVI-I to VGA cable. See
• USB. Connector located at display stand base.
Video card:
DVI, DisplayPort, or VGA
– A –
DVI-D, DisplayPort, or DVI-I to VGA
Caution
Do not connect or disconnect the video or power cables while Cintiq or your computer are turned on.
This can damage the display or computer video card.
Only use a power adapter specified for use with your pen display. Use of an improper power adapter may
damage the pen display.
For optimum performance, the display refresh rate should use a vertical frequency of 60 Hz. Make sure the
refresh rate does not exceed the maximum vertical frequency (85 Hz) that Cintiq can support. See the
Important Product Information guide for specifications.
Contents Index
cable replacement.
– B –
USB
Contents Index
cable replacement.
12
AC
– D –
Power adapter
– C –
DC input. Connect to
display stand extension
cable.
12