General Operation Of The Hr Monitor; Buttons On The Hr Monitor - Beurer PM 18 Operating Instructions Manual

5. G
ENERAL

General Operation of the HR Monitor

Buttons on the
HR monitor
1 LIGHT
2 MODE
3 START/
STOP/
RESET
4
SELECT
5
SENSOR
O
PERATION OF THE
Pressing quickly illuminates the display for
3 seconds
Switches between the different menus and set-
ting displays. If you keep the MODE button
pressed for at least 5 seconds, you get into the
setting mode for a menu. Exit the setting mode
also by keeping the MODE button pressed for 5
seconds.
Start/stops functions, sets values. Keep
pressed to accelerate input.
Counts values forwards.
Starts and stops the stop watch.
Resets the stop watch function and the re-
sults (Kcal etc.).
Sets values.
Counts values backwards.
Display in training mode.
Metal application on the front of the HR monitor.
Starts the pulse measurement automatically
when touching the metal surface.
HR M
ONITOR
8