Advertisement
Quick Links
Excessive motor use
The motor will switch off if the screen is used
continously for more than three minutes. Allow the
motor to cool for 30 minutes before using again.
If you do not expect to use your screen for some
time, please disconnect the power.
Protecting your Screen:
To ensure long lasting viewing enjoyment keep the
screen rolled up when not in use. Check both the front
and back surfaces before retracting into the case to
make sure it is free of dust, dirt, insects or other foreign
matter. Use a soft brush or cloth to lightly remove any
foreign particles.
Cleaning your Screen:
Use warm water with a mild detergent to remove any
marks on the surface (only dab, do not rub) or screen
casing. Immediately dry the screen with a soft cloth or
towel. Do not leave it to air dry.
Never use any solvents, chemicals or abrasive cleaners
on the screen surface as they can permanently damage
the screen surface.
Note: Warranty does not cover un-installing
or re-installing unit.
Imported and Distributed in Australia by
Herma Technologies
Factory 4A, 6 Albert St
Preston, VIC 3072
For more information please go to
www.grandviewscreens.com.au
or call 1300 730 025
Sep 10 V1.3
Grandview Smart Screen
User Manual
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Grandview Smart Screen
Summary of Contents for Grandview Smart Screen
- Page 1 Imported and Distributed in Australia by Herma Technologies Factory 4A, 6 Albert St Preston, VIC 3072 Grandview Smart Screen For more information please go to Note: Warranty does not cover un-installing www.grandviewscreens.com.au User Manual or re-installing unit.
- Page 2 UP (top limit) and fully Down Smart Screen, This screen is designed to produce the screen case. (bottom limit) positions. You can adjust the bottom limit the sharpest, most pleasing pictures with to set your viewing height.
Need help?
Do you have a question about the Smart Screen and is the answer not in the manual?
Questions and answers