Sony DCR-PC105 Service Manual page 85

Digital video camera recorder
Hide thumbs Also See for DCR-PC105:
Table of Contents

Advertisement

Using special effects
– Digital effect
The POWER switch should be set to
Operate by touching the panel.
(1) Press FN, then select PAGE2.
(2) Press DIG EFFT. The screen to select a digital
effect is displayed.
(3) Press the desired mode. When you select
STILL or LUMI., the still image is stored in
memory.
(4) Press – (to decrease the effect)/+ (to increase
the effect) to adjust the effect.
Items to adjust
SLOW SHTR
Shutter speed. The larger the shutter
speed number, the slower the shutter
speed.
OLD MOVIE
No items need to be adjusted.
STILL
The degree of the still image you want
to superimpose on the moving picture
FLASH
The interval of flash motion
LUMI.
The brightness of the area in the still
image which is to be swapped with a
moving picture
TRAIL
The vanishing time of the incidental
image
(5) Press
OK to return to PAGE2.
2
DIG
EFFT
.
DIG EFFT
OFF
OK
SLOW
OLD
SHTR
MOVIE
STILL
FLASH
LUMI.
TRAIL
Utilisation d'effets spéciaux
– Effet numérique
Le commutateur POWER doit être réglé sur
.
Utilisez le panneau tactile.
(1) Appuyez sur FN, puis sélectionnez PAGE2.
(2) Appuyez sur DIG EFFT. L'écran de sélection
des effets numériques s'affiche.
(3) Appuyez sur la touche qui correspond au
mode souhaité. Quand vous sélectionnez
STILL ou LUMI., l'image fixe est mémorisée.
(4) Ajustez l'effet en appuyant sur – (pour atténuer
l'effet)/+ (pour accentuer l'effet).
Eléments à régler
SLOW SHTR
Réglage de la vitesse d'obturation. Plus
le numéro est élevé, plus la vitesse est
lente.
OLD MOVIE
Il n'y a aucun réglage à effectuer.
STILL
Réglage de l'intensité de l'image fixe
que vous souhaitez superposer sur
l'image animée
FLASH
Réglage de l'effet stroboscopique
LUMI.
Luminosité de la zone de l'image fixe
devant être remplacée par une image
animée
TRAIL
Réglage de la durée de rémanence de
l'image
(5) Appuyez sur
OK pour revenir à PAGE2.
4
DIG EFFT
OFF
LUMI.
The bar appears when setting following
digital effect modes: STILL, FLASH,
LUMI., TRAIL./
Les barres apparaissent lorsque vous
réglez les modes d'effet numérique
suivants : STILL, FLASH, LUMI. et
TRAIL.
OK
77

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dcr-pc103eDcr-pc104eDcr-pc105e

Table of Contents