Table of Contents
Advertisement
Profile List
Add/Delete/Edit Button
Activate Button
Configure the Profile
Profile Name
SSID
Channel
Netw ork Type
Configure the Profile
The " Profiles List" is for you to manage the netw orks you connect
to frequently. The profile list displays all the profiles and the
relative settings of the profiles including Profile Name, SSID,
Channel, etc. If you w ant to connect to any profiles on the list,
double-click the profile or select the profile and click "Activate",
and the Internet Camera w ill automatically connect to the
selected profile.
Click these buttons to add/delete/edit the selected profiles.
Click "Activate" to connect to the selected profile. When a profile
is activated, the card w ill be initially connected to the profile.
Define a recognizable profile name for you to identify the different
netw orks.
The SSID (up to 32 printable ASCII characters) is the unique
name identified in a WLAN. The ID prevents the unintentional
merging of tw o co-located WLANs.
You may specify a SSID for the card and then only the device
with the same SSID can interconnect to the card. If you w ant to
add one of the netw orks nearby to the profile list, pull dow n the
menu, all the netw orks nearby will be listed and you can add one
of them to the profile list.
This setting is only available for Ad Hoc mode. Select the number
of the radio channel used for the netw orking. The channel setting
should be the same w ith the netw ork you are connecting to.
Infrastructure – This operation mode requires the presence of a
Wireless LAN Access Point or Router. All communication is done
via the Access Point or Router.
Ad-Hoc – Select this mode if you w ant to connect to another
wireless stations in the Wireless LAN netw ork w ithout through an
Access Point or Router.
17
Advertisement
Table of Contents
