Table of Contents
Advertisement
Netw ork Setting
Video Port
Web Port
6.2.2.
Wireless Setting
If you w ant to use the Internet Camera through w ireless LAN, please set up the Internet
Camera through Ethernet first and make sure your w ireless LAN setting is correct. After
setting the w ireless LAN, unplug the Ethernet cable then you can start to use the Internet
Camera through w ireless LAN. If the w ireless configuration does not w ork, please plug the
Ethernet cable again, and configure the Internet Camera through Ethernet until the w ireless
LAN settings are correct.
The Video Port is used to transmit or receive the video streaming
in the netw ork. The default port setting is "4321". If you w ant to
view the video from the camera, the port setting should be
correct.
This camera support w eb connection, the default w eb port is 80.
Since the w eb server may use port 80, you can use a different
port for the camera. If you change the w eb port from 80 to 8080,
you must type
http://192.168.2.3:8080
through the w eb browser.
15
to connect the camera
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers