Table of Contents
Advertisement
6.2.1.
Network Setting
Netw ork Setting
Internet Camera Name
IP Address
Subnet Mask
Gatew ay
DNS Server
The default camera name is "WIPCamera_MJPEG". It is
recommended to name a meaningful name for the camera.
Enter an unused IP Address w ithin the IP address range used on
your LAN. If the IP Address of your LAN is from the 192.168.2.1
to 192.168.2.254, you can set an unused IP Address from the
range for the camera, for example: 192.168.2.250.
The Subnet Mask field must match the subnet setting on your
LAN. For example: 255.255.255.0.
The Gatew ay is used to forw ard frames to destinations in a
different subnet on the Internet. The Gatew ay setting must be the
same w ith the gatew ay used by the PCs on your LAN.
DNS Server (Domain Name Server) that translates names to IP
addresses. Set the same DNS Server as the PCs on your LAN.
14
Advertisement
Table of Contents
Need help?
Do you have a question about the 802.11g and is the answer not in the manual?
Questions and answers