Aastra 632d User Manual page 89

Notes:
• Only one Bluetooth connection at a time is possible.
• To find out how to make phone calls with the headset, refer to the chapter
a headset", page 27.
Settings
Bluetooth
Enable Bluetooth
Subscribe headset
Select headset
Delete
Aastra 632d
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46 eud-1586/1.0 – R3.0 – 04.2013
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to Bluetooth and press the
Activating/deactivating Bluetooth mode:
Scroll to Enable Bluetooth
➔
The setting is stored,
Or:
The Bluetooth-mode is also available via the service menu: Press key 5 and
hold it down for a moment,
Note:
An activated Bluetooth mode does not imply that a Bluetooth connection is
running.
Pair new device:
Scroll to Subscribe headset
Switch on the device you want and set to subscribe mode. Select the device
you want and enter the Bluetooth device PIN.
➔
Device is paired, is displayed.
List of paired devices:
Switch on the device you want, scroll to
and select a device from the list.
➔
The list of coupled devices is displayed.
Note:
The list is limited to 2 Bluetooth devices. Remove a device before you connect
another one.
Remove device:
Scroll to Select headset and press the
Select the device you want and press the
➔
Device was removed.
Personalizing your phone
Menu softkey.
Select softkey.
Select softkey.
and press the Select softkey.
is displayed.
Activate Bluetooth.
and press the Select softkey.
Select headset, press the
Select softkey.
Delete softkey.
"Using
Select softkey
89