Aastra 632d User Manual page 69

There is no time limit to the duration of a verification call, which must be terminated
on the destination phone or on the monitoring handset. Once the call has been
cleared down, the monitoring phone immediately switches back to monitoring mode.
Settings
Room monitoring
<Room monitoring set-
ting>
Enable room monitor-
ing
Reset
Aastra 632d
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46 eud-1586/1.0 – R3.0 – 04.2013
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to Room monitoring
Room surveillance settings:
1. Scroll to Mode, select the room monitoring mode you want and press the
Select softkey.
2. Scroll to Sensitivity, select the level you want and press the
3. Scroll to Activation delay, select the destination you want and press the
Select softkey.
4. Scroll to Destination number, enter the destination number and press the
Save softkey.
Note:
Test call destination > Select allows you to test the phone number you have
entered to make sure it is correct.
Activating room monitoring:
Scroll to Enable room monitoring
➔
You hear the acknowledgement tone and the display shows the destination
number after 10 seconds. The
room monitoring is activated.
To deactive room monitoring:
Press the Reset softkey.
Or:
Press Menu > Activated features
➔
Room monitoring is now deactivated.
Supplementary features
Menu softkey.
Select softkey.
and press the Select softkey.
and press the Select
symbol shows when the microphone for
> Reset.
Select softkey.
softkey.
69