Maintenance & Service - SCIFIT PRO2 Operation Manual

Maintenance
The PRO2 and PRO1000 are virtually maintenance free.
After training, always wipe down your SCIFIT exercise
product. Perspiration that continuously settles on the
frame, upholstery, casings, and control console may
eventually cause rust or damage. Damage resulting
from lack of maintenance is NOT covered under
warranty.
Clean the console, seat, hand grips and body with
a commercially manufactured wipe designed for the
fitness industry, or a damp cloth.
CAUTION
In order to maintain a safe level of operation, equip-
ment must be inspected on a routine basis for dam-
aged or worn parts. Failure to inspect equipment
may result in injury to yourself or others.
Special attention should be paid to rollers, pins, pivot
joints and bearings. Check for loose screws / nuts
/ bolts periodically.
identified and require replacement, the equipment
should be put out of service until repaired.
MAINTENANCE & SERVICE
If defective components are
UNITED STATES CUSTOMER SERVICE
For assistance in the service of SCIFIT products;
phone : (800) 745-1373 or (918) 359-2040
fax : (918) 359-2045
e-mail: service@scifit.com
The Product Support department is staffed from 7:00
AM to 6:00 PM CST Monday through Friday. A voice
mail service is available 24 hours a day for recording
messages to request technical support and to order
replacement parts. Our mailing address is:
SCIFIT Systems Inc.
5151 S. 110th E. Ave.
Tulsa, OK 74146
USA
UK & EUROPEAN CUSTOMER SERVICE
phone : +44 1344 300022
fax: +44 1344 868838
e-mail: info@scifit.uk.com
SCIFIT LTD (UK)
Lexham House
Forest Road
Binfield
Berkshire, RG42 4HP
UK
Company Number: 5970624 (UK)
18