Summary of Contents for ZyXEL Communications Prestige 650
Page 1
Prestige 650 Read Me First PORT CONNECTION Connect to a telephone jack using a telephone wire. CONSOLE Connect to a serial port (COM port) on your computer using the RS-232 end (the big end) of the console cable (optional part). Connect the other end to the Prestige CONSOLE port.
Register your Prestige online at www.zyxel.com for free product updates and information. IP Address 192.168.1.1 Default Password 1234 Subnet Mask 255.255.255.0 DHCP IP Pool (Router 192.168.1.33 – 192.168.1.64 only) You need an account with an Internet Service Provider (ISP). 1. Your user (account) name and password. 2.
Verifying TCP/IP Properties 1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 2. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway. Set ting up Yo ur W ind ow s NT /20 00 /XP Comp ute r Configuring TCP/IP 1.
2. SMT (System Management Terminal). Access the SMT via: • • Telnet Console port using terminal emulation software Procedure For Web Configurator Configuration 1. Launch your web browser and enter “192.168.1.1” as the URL. 2. Type “admin” as the user name, "1234" (default) as the password and press ENTER. 3.
Page 5
PROBLEM CORRECTIVE ACTION Check if you have an SMT console session running. If all of the 10/100M LAN LEDs are off, check the cables between the Prestige and your I cannot ping any computer on computer or hub. the LAN.(Router only) Verify that the IP address and the subnet mask of the Prestige and the computers are on the same subnet.