Table of Contents
Advertisement
Configuring a Filter Set
In order to distinguish between the 12 filter sets, each filter set
should have a name or some comments. You can edit these
comments in the following way.
1. From the Main Menu, select option '21. Filter Set
2. From this menu, you can choose from among the twelve filter
This will bring you to the Edit Comments field. Whatever the
comments are for that filter set will be displayed in this field. You
can edit the comments you wish to use to identify that filter set.
Once you have completed filling in the Edit Comments field, press
ENTER at the message: 'Press ENTER to Confirm ...' to confirm
your selections, or press ESC at any time to cancel your selections.
The new information will now be displayed in the read-only section
of 'Menu 21 - Filter Set Configuration' as shown below:
Figure 8-2 Menu 21 - Filter Set Configuration
Once you press ENTER, you will be taken to 'Menu - 21.1 - Filter
Rules Summary' as seen below. The information displayed in this
Configuration'. This will bring you to 'Menu 21 - Filter Set
Configuration'.
sets. Select the filter set you wish to configure (1-12).
Filter Configuration 79
Advertisement
Table of Contents
