Belling 100 GDO Instructions For Use Manual page 15

Double oven gas cooker
Table of Contents

Advertisement

IGNITION OF THE OVEN BURNER
1) Open the oven door to the full
extent.
WARNING: Risk of explosion! The
oven door must be open during this
operation.
2) Lightly press and turn the temperature
knob anti-clockwise (fig. 5.4) to the max
position (
fig. 5.1).
3) Press the knob firmly until the burner
lights.
Never continue this operation for
more than 15 seconds. If the burner
has still not ignited, wait for about
1 minute prior to repeating the igni-
tion.
In case of mains failure, press the knob
firmly and immediately put a lit match
or taper to the opening "F" (fig. 5.3).
4) Wait about 10/15 seconds after the
burner lights before releasing the
knob (time of priming of the valve).
5) Close the oven door slowly and
adjust the burner according to the
power required.
If the flame extinguishes for any reason,
the safety valve will automatically shut
off the gas supply to the burner.
To re-light the burner, first turn the oven
control knob to position
least 1 minute and then repeat the
lighting procedure.
, wait for at
OVEN COOKING
Before introducing the food, preheat the
oven to the desired temperature.
For a correct preheating operation, it is
advisable to remove the tray from the
oven and introduce it together with the
food, when the oven has reached the
desired temperature.
F
Fig. 5.3
Fig. 5.4
15

Advertisement

Table of Contents
loading

Table of Contents