Sc-1Xgl-Xfp; Table 8 Sc-1Xgs-Cx4 Card Interface Attributes; Table 9 Sc-1Xgs-Cx4 Indicators Functions - Zte ZXR10 5900 Series Hardware Manual

T 8 SC-1XGS-CX4 C
ABLE
Port
CX4
There are two indictors on SC-1XGS-CX4 panel, their functions are
Indicators
described in
T 9 SC-1XGS-CX4 INDICATORS FUNCTIONS
ABLE
Indicators
LINK/ACT

SC-1XGL-XFP

SC-1XGL-XFP(1–port 10G Ethernet optical interface card) pro-
Functions
vides users with one 10G Ethernet XFP optical interface, which is
used for uplink cascading. Four cards can be configured in ZXR10
5928/5228/5928-FI/5228-FI /5952/5252 system as maximum,
providing four 10G Ethernet XFP optical interfaces.
The SC-1XGL-XFP panel is shown in
Panel
I
ARD NTERFACE
Attributes
Output
Signal Rate: 3.125 ± 100 ppm
Different output voltage peak-to-peak value:
max 1200mV; min: 800mV
Different output voltage peak-to-peak value
difference: 150mV
Common mode output voltage limit value:
max: 1.9V; min: -0.4V
Voltage level shift time: max: 130ps; min:60ps
Output dithering peak-to-peak value:
random dithering: 0.27UI
intrinsic dithering: 0.17UI
all dithering: 0.35UI
Input Error rate: 10
Signal rate: 3.125 ± 100 ppm
End coupling: AC
Different input voltage peak-to-peak value,
max: 1200mV
Table 9.
Functions
On: A link is established on the interface
Off: This interface is not connected to others.
Flash: Packets are being transmitted or received
on the interface.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 Units/Components Description
A
TTRIBUTES
-12
Figure 23.
19