Functions - Zte ZXR10 5900 Series Hardware Manual

ZXR10 5900/5200 Series Hardware Manual
4 Confidential and Proprietary Information of ZTE CORPORATION
� Abundant network protocols
� Open architecture design with greater upgrade capability

Functions

ZXR10 5900/5200 series products contain the following nine prod-
ucts: ZXR10 5924, ZXR10 5928, ZXR10 5928-FI, ZXR10 5952,
ZXR10 5224, ZXR10 5228, ZXR10 5228-FI, ZXR10 5252, ZXR10
5928-PS. All the above Ethernet switch series products use the
same solution.
ZXR10 5900/5200 series products can switch data in layer 2/3 in
full line speed and support multiple protocols and provide various
functions.
1. Physical Port
Supporting port rate, duplex mode and auto-sensing
�
Supporting port mirroring
�
Supporting broadcast storm suppression
�
Supporting line diagnosis & analysis
�
2. VLAN
Supporting VLAN
�
Supporting IEEE 802.1Q, allowing up to 4094 VLANs
�
Supporting PVLAN
�
Supporting VLAN double-tag
�
Supporting SuperVLAN
�
3. Layer 2 Protocols
Supporting STP,
�
Supporting static Trunk and
�
Supporting IGMP
�
4. Routing Protocols
Supporting unicast routing protocols such as static route,
�
RIP v1/v2, OSPF, IS-IS,
Supporting multicast routing protocols such as IGMP v1/v2,
�
PIM-SM, MSDP
5. ACL
Supporting basic ACL, extended ACL, L2 ACL and hybrid
�
ACL
Supporting ACL time range limit
�
6. QoS
Supporting 802.1p
�
Supporting SP
�
Supporting traffic monitoring
�
based on port, protocol, and subnet
RSTP and MSTP
LACP
Snooping
BGP
and WRR queue schedule mode