Table 4 Zxr10 5900/5200 Attributes Of 10/100/1000Base-T On Main Control Board - Zte ZXR10 5900 Series Hardware Manual

ZXR10 5900/5200 Series Hardware Manual
Indicators
16 Confidential and Proprietary Information of ZTE CORPORATION
T 4 ZXR10 5900/5200 A
ABLE
M C B
ON AIN ONTROL OARD
Port
10/100/1000Base-T
There are 50
5924/5224/5928/5228/5928-FI/5228-FI system.
indicators on ZXR10 5952/5252 system.
described in Table 5.
T 5 ZXR10 5900/5200 M
ABLE
D
ESCRIPTION
Indicator Description
RUN Off: The main control board is faulty.
Flash: The main control board is operating normally.
PWR Permanently on: The system power supply works well.
Off: The system power supply is faulty.
LINK/ACT Flash: Packets are being transmitted or received on the
interface.
On: A link is established on the interface.
Off: There is no connection between this interface and
others.
FDX/COL On: The interface link is full-duplex.
Off: The interface link is half-duplex.
Flash: there is a conflict in sending and receiving
packets on this interface.
There are 39 indicators on front panel of ZRX10 5928-PS. The
board supports three display modes: rate display, duplex display
and POE display. These indicators on port are double-color LEDs.
There are five indicators: mode, RUN, PWR, RPS, M/S. The indi-
cator functions are shown in
TTRIBUTES OF
Attributes
Standard:
• 1000BASE-T IEEE 802.3ab
• 1000BASE-X IEEE 802.3z
• 100BASE-TX IEEE 802.3u
• 100BASE-FX IEEE 802.3u
• 10BASE-T IEEE 802.3
RJ45
Category-5 UTP cables
Maximum transmission distance: 100 m
MDI/MDIX
indicators on front
C
AIN ONTROL
Table 6.
10/100/1000B -T
ASE
panel of ZXR10
There are 54
Their functions are
B I
OARD NDICATOR