Shutdowndial-Peer; Shutdownvoice-Port - Zte ZXR10 Command Manual

Instructions
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
Purpose
Command Modes
Syntax
Defaults
Instructions
Example
� show voice-port: It shows the configuration information of
all voice ports.
� show voice-port [<voice-port> : It shows the configuration
information of the specified voice port.
� show voice-port summary: It shows the simple configura-
tion information of all voice ports.
� It is only applied to ZXR10 GAR and ZXR10 ZSR.

shutdowndial-peer

Use this command to configure the management status of the dial-
peer as down. Change the management status of the dial-peer to
up with the no command.
Dial-up peer configuration
shutdown
no shutdown
If this area is configured, the management status is up by default.
� This command is applied to the dial-peer in voip or pots type.
� The call will not be connected if the dial-peer status is down.
� It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to set the management status of dial-
peer 100 in voip type to down.
ZXR10(config)#dial-peer voice 100 voip
ZXR10(config-voip100)#shutdown

shutdownvoice-port

Use this command to set the management status of the voice port
to down. Change the management status of the dial-peer to up
with the no command.
Voice port configuration
shutdown
no shutdown
If this area is configured, the management status of the voice port
is up by default.
It is only applied to ZXR10 GAR and ZXR10 ZSR.
This example describes how to change the management status of
port voice_3/1 to down.
ZXR10(config)#voice-port voice_3/1
ZXR10(config-voice-port)#shutdown
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 2 VOIP Configuration
21