Plug Replacement (Uk & Ireland Only); Declaration Of Conformity - Worx WX646 Safety And Operating Manual

PLUg rePLaCement
(UK & ireLand onLy)
If you need to replace the fitted plug then
follow the instructions below.
IMPoRtANt
The wires in the mains lead are colored in
accordance with the following code:
BlUe=NeUtRAl BRoWN=lIve
As the colors of the wires in the mains lead of
this appliance may not correspond with the
colored markings identifying the terminals
in your plug, proceed as follows. The wire
which is colored blue must be connected
to the terminal which is marked with N.
The wire which is colored brown must be
connected to the terminal which is marked
with L.
WARNING!Never connect live or
neutral wires to the earth terminal of
the plug. Only fit an approved 13A BS1363/A
plug and the correct rated fuse.
Note: If a moulded plug is fitted and has
to be removed take great care in disposing
of the plug and severed cable, it must be
destroyed to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Palm sander
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
deCLaration of
Conformity
We,
Positec Power Tools (Europe) Ltd, PO Box 152,
Leeds, LS10 9DS, UK
Declare that the product,
Description WoRx Palm sander
Type Wx646 Wx646.1
(645-649-designation of machinery,
representative of palm sander)
Function
Remove surface material with a plate
Complies with the following Directives,
Machinery Directive
2006/42/ec
Electromagnetic Compatibility Directive
2004/108/ec
RoHS Directive
2011/65/eU
Standards conform to:
eN 55014-1
eN 55014-2
eN 61000-3-2
eN 61000-3-3
eN 60745-2-4
eN 60745-1
The person authorized to compile the technical
file,
Name: Russell Nicholson
Address: Positec Power tools (europe)
ltd, Po Box 152, leeds, lS10 9DS, Uk
2012/12/07
Leo Yue
POSITEC Quality Manager
WX646 WX646.1