Worx WX652 Safety And Operating Manual
Random orbital sander
Hide thumbs
Also See for WX652:
- Original instructions manual (108 pages) ,
- Original instructions manual (61 pages) ,
- Original instructions manual (109 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Worx WX652
Summary of Contents for Worx WX652
- Page 1 SAFETY AND OPERATING MANUAL Random orbital sander WX652 WX652.1...
-
Page 2: General Power Tool Safety Warnings
When operating a power tool connected and properly used. Use outdoors, use an extension cord of these devices can reduce dust-related suitable for outdoor use. Use of a cord hazards. suitable for outdoor use reduces the risk of Random orbital sander WX652 WX652.1... - Page 3 14. Before sanding, check the area is free of identical replacement parts. This will nails, screws, etc. ensure that the safety of the power tool is 15. Never stop the sander by applying a force maintained to the base plate. Random orbital sander WX652 WX652.1...
- Page 4 SYMBOLS 16. Only use paper in good condition. Do not use torn or worn paper. 17. Do not sand material containing asbestos To reduce the risk of injury, user due to a health risk. must read instruction manual 18. Do not sand lead based paint due to the risk of lead poisoning.
- Page 5 ON/Off WItCH HAND GRIP AREA DUSt bAG* DUSt ExtRACtION OUtlEt lAtCHING lEvER bASE PlAtE SANDING PAPER* (See fig. b) * Not all the accessories illustrated or described are included in standard delivery.
-
Page 6: Technical Data
Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice. Random orbital sander WX652 WX652.1... -
Page 7: Operating Instructions
To start your sander, depress the protective cover over the switch at the position marked “I” . To stop your sander, depress the protective cover at the position marked “0” . 4. HAND GRIP AREA (See fig. f, G) Random orbital sander WX652 WX652.1... - Page 8 — The higher the grade number, the finer the grit. For rough work start with a low grade of grit. (e.g. 60 grit) and change to a higher, finer grade (e.g. 120 Random orbital sander WX652 WX652.1...
-
Page 9: Maintenance
Use only good quality sand paper. The sand paper controls the sanding efficiency, not the amount of force you apply to the tool. Excessive force will reduce the sanding efficiency and cause motor overload. Random orbital sander WX652 WX652.1... - Page 12 Copyright © 2012, Positec. All Rights Reserved. 2PES04APK11001A1...