Cancelling The Programme - Candy COS 105 F User Instructions

EN
START BUTTON
After selecting a
programme wait that a
"Spin" indicator light is
illuminate before pressing
the START button.
Press to start the selected
cycle (according to the
selected cycle one wash
stage indicator lights will
illuminate).
NOTE: WHEN THE START
BUTTON HAS BEEN
PRESSED, THE APPLIANCE
CAN TAKE FEW SECONDS
BEFORE STARTS
WORKING.
CHANGING THE SETTINGS
AFTER THE PROGRAMMES
HAS STARTED (PAUSE)
The programme may be
paused at any time during
the wash cycle by holding
down the "START/PAUSE"
button for about 4 seconds.
When the machine is in the
paused mode, a "wash
stage" indicator light and
option buttons will flash.
To restart the programme
press the START button once
again.
If you wish to add or remove
items during washing, wait 2
minutes until the safety
device unlocks the door.
When you have carried out
the manoeuvre, close the
door, press START button and
the appliance will continue
working where it left off.
CANCELLING THE
PROGRAMME
To cancel the programme,
set the selector to the OFF
position.
Select a different
programme.
Re-set the programme
selector to the OFF position.
26
HR
TIPKA START
Nakon ‰to odaberete program
pranja, priãekajte da zasvjetli
svjetlosni pokazatelj za "broj
okretaja centrifuge" prije nego
pritisnete tipku START
Pritisnite tipku sda pokrenete
odabrani ciklus pranja (zavisno
o odabranom ciklusu pranja,
svjetlit çe jedan od svjetlosnih
pokazatelja).
ZNAâAJNO:
NAKON ·TO PRITISNETE
TIPKU START,
PERILICI JE POTREBNO
NEKOLIKO
TRENUTAKA DA ZAPOâNE
S RADOM.
MIJENJANJE RADNIH POSTAVKI
NAKON POKRETANJA
PROGRAMA PRANJA (PAUZA)
Program pranja moÏe se
privremeno zaustaviti (pauza)
u bilo koje vrijeme ciklusa
pranja, tako da tipku
"START/PAUZA" drÏite
pritisnutom oko 4 sekunde.
Kada je perilica privremeno
zaustavljena, svjetlosni
pokazatelji "faze pranja" i
opcijskih tipki çe treptati.
Za ponovno pokretanje
programa pranja, jedanput
pritisnite ponovno tipku START.
Ako tijekom pranja Ïelite
dodati ili izvaditi rublje,
priãekajte oko dvije minute
kako bi sigurnosni uredjaj
omoguçio otvaranje vrata.
Nako ‰to ste to izveli, zatvorite
vrata, pritisnite tipku START i
perilica çe nastaviti s radom
od toãke gdje je bila
zaustavljena.
PONI·TAVANJE PROGRAMA
PRANJA
Da poni‰tite trenutni program
pranja, postavite gumb za
izbor programa na poloÏaj
"OFF".
Odaberite drugi program
pranja.
Ponovno postavite gumb za
izbor programa na poloÏaj
"OFF".
C