Table of Contents
Advertisement
11. SPECIFICATIONS
Model
Enclosure
Power Handling Capacity
Rated Impedance
Sensitivity
Frequency Response
Speaker Component
Directivity Angle
Input Terminal
Finish
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Reference of Load Impedance and Output Wattage of Power Amplifiers
Amplifier Condition
Impedance : 8 Ω
Output Wattage : 1,100W
( 8 Ω bridge mode of DA-550F)
Impedance : 8 Ω
Output Wattage : PW
This chart is a reference for calculating the amplifierʼs output wattage. Pease refer to the load impedance for
the amplifier shown in " 6. AMPLIFIER CONFIGURATIONS ".
18
SR-MF1B / SR-MF1W
89 dB (1W,1m equivalent, measured
130 - 18,000 Hz (when using an
optional processor)
2.8" (7 cm) cone-type x 4
2" (5 cm) cone-type x 8
Horizontal : 100 °
Vertical : Tilt 0 or 3 °
Dispersion 10, 15, 20, 25 or 30 °
Enclosure : Alminium
Front Grille : Punched steel plate
*SR-MF1B : Black paint
*SR-MF1W : White paint
Load Impedance
1,100 [W]
Sealed type
Continuous program: 240 W
12 Ω
at 8m)
Removable screw terminal
44.9" (W) x 343.3" (H) x 62.2" (D)
114 (W) x 872 (H) x 158 (D) mm
18.5 lb (8.4 kg)
8 Ω
10 Ω
880 [W]
P [W]
P x 8/10 [W]
SR-ML1B / SR-ML1W
Bass-reflex type
24 Ω
84 dB (1W,1m equivalent, measured
at 8m)
60 - 700 Hz (when using an optional
processor)
3.5" (9 cm) cone-type x 4
Enclosure : Alminium
Front Grille : Punched steel plate
*SR-ML1B : Black paint
*SR-ML1W : White pain
16.1 lb (7.3 kg)
12 Ω
733 [W]
P x 8/12 [W]
24 Ω
367 [W]
P x 8/24 [W]
Advertisement
Table of Contents
