Pfaff expression line Owner's Manual page 46

Is a correct spool cap used?
Is the best spool pin position used?
Is the stitch plate hole damaged?
Bobbin thread breaks
Did you insert the bobbin properly?
Is the stitch plate hole damaged?
Is the bobbin area clean?
Is the bobbin wound correctly?
The seam has uneven stitches
Is the thread tension correct?
Are you using too thick or slubbed thread?
Is the bobbin thread evenly wound?
Is a correct needle used?
Did you thread the machine properly?
Has sewing lint collected between the feed
dogs?
If you have followed this trouble shooting information and still have problems, take your sewing machine
your sewing fabric and bring it to your dealer. A sewing sample will often give much better information
than words.
Non-original parts and accessories
The warranty does not cover any defect or damage caused by use of non-original accessories or parts.
5:4
Attach a spool cap of the right size for the actual
thread spool.
Try a different spool pin position (vertical or
horizontal).
Change the stitch plate.
Check the bobbin thread.
Change the stitch plate.
Clean lint from bobbin area and use only the original
PFAFF bobbins approved for this model.
®
Wind a new bobbin.
Check needle thread tension and the threading.
Change the thread.
Check bobbin winding.
Insert a proper needle correctly as described in
chapter 2.
Check how the machine is threaded.
Remove the stitch plate and clean the feed dogs with a
brush.
dealer!
®