Minelab F3 COMPACT Operation Manual page 6

F3 COMPACT Operations Manual
The F3 COMPACT is a robust detector that is extremely simple
to operate. When working in an environment that includes highly
mineralised ground or electrical interference from overhead power
lines or other sources, simple and quick semi-automatic procedures
can be initiated by an operator resulting in the detector continuing to
perform at maximum capability.
The F3 COMPACT incorporates several safety features such as
Low Battery and System Fault warnings, audible confirmation at
the completion of specific operational procedures, and continuous
microprocessor controlled internal self-testing. The inclusion of a
Test Piece provides the operator with a quick and easy check to
ensure that the detector is working at its operational capability.
The F3 COMPACT also provides a visual indication of detection via
a Light Emitting Diode (LED) display. Sensitivity and volume settings
can be changed through seven preset selections. If required, the F3
COMPACT can be programmed to user initiated customised volume
and sensitivity selections using Minelab's configuration software.
Components of the F3 COMPACT are manufactured within tightly
controlled parameters so that they can be interchanged in the field
without any requirement for calibration.
The F3 COMPACT is designed to satisfy MIL STD 810G.
NOTE
Although the F3 COMPACT can withstand immersion to a depth of
three metres for short periods of time, it is NOT designed for use as
an underwater detector.
4