Fisher & Paykel SMARTDRIVE PHASE 7 Service Manual page 12

517790D
2.4.1 Warm Wash Temperature Adjustment (MW Only)
The warm wash temperature adjustment will alter the amount of time that the hot valve pulses on
and off for.
1. Turn machine on at the wall but do not press POWER.
2. Press START/PAUSE and hold down, then press POWER. Two quick beeps will be heard and
the machine will show an unusual pattern of lights. In this mode the lights are used to indicate
the different options available.
3. Select the Warm Wash Temperature.
4. Advancing the Wash Progress LED by pressing ADVANCE will increase the wash
temperature. If the ADVANCE button is kept pressed, the light will scroll back to the coldest
setting available for that wash temperature.
5. Press the POWER to 'lock' in the setting.
Note:
If the required temperature still can't be obtained, advance the wash progress LED (as
described in the procedure above) across to the spin LED and manually adjust the flow of
the taps.
2.4.2 Wash Temperature Adjustment (GW Only)
1. Turn machine on at the wall but do not press POWER.
2. Press START/PAUSE and hold down, then press POWER. Two quick beeps will be heard and
the machine will show an unusual pattern of lights. In this mode the lights are used to indicate
the different options available.
3. Select the WASH TEMPERATURE to be adjusted.
The wash progress lights show the temperature adjustment possible for that temperature.
4.
Pressing the ADVANCE will cause the wash progress light that is on to change. Advancing the
Wash Progress light will increase the wash temperature. If the ADVANCE button is kept
pressed, the light will scroll back to the coldest setting available for that wash temperature
12