Cleaning The Filters - Jacuzzi LCD Series Owner's Manual

the information, supplies, and accessory products you will need to accomplish
this.

12.1 Cleaning The Filters

Your Jacuzzi Premium spa is equipped with high-performance filter cartridges
located inside the filter skimmer. Fine debris is filtered by the circulation pump
drawing water through the circulation pump cartridge. Larger debris is also
filtered by the 2-speed pump drawing water through the main pump cartridge
during normal operation and at each filter cycle. Both cartridges provide
unsurpassed water quality by trapping suspended particles on their outer
surface.
All models include filters on their footwell suction covers (Page 14) that
prevent debris from entering pump 2 (and J-380 pump 3), when
operating. These filters must remain in place to protect the pump 2
(and J-380 pump 3) plumbing network(s). They should be cleaned every
2 months, or when weak pump performance is observed.
To ensure optimum performance, clean and reuse both cartridges once a
month. ALWAYS TURN POWER TO SPA OFF BEFORE CLEANING THE
FILTER CARTRIDGES! Refer to the filter cleaning/replacement procedure
below:
A
B
filter cover
handles
(Inside Spa View)
Lift upward on filter cover handles to
unsnap and remove it from mating
retainer clips.
TURN POWER TO SPA OFF!
C
(Inside Spa View)
Rotate each filter cartridge handle
counterclockwise to unthread from
mating wall fitting.
D
handle
Skimmer Well
Remove both cartridges from
skimmer well.
Page 31