Spa Maintenance; Cleaning The Filters - Jacuzzi J-315 Owner's Manual

J-300 Series

12.0 Spa Maintenance

Proper and regular maintenance of your spa will help it retain its beauty and
performance. Your authorized Jacuzzi dealer can supply you with all the infor-
mation, supplies, and accessory products you will need to accomplish this.

12.1 Cleaning The Filters

Your Jacuzzi spa is equipped with a skimmer bag and two high performance
pleated filter cartridges located under the filter cover. Fine debris are filtered
by the circulation pump drawing water through the skimmer bag and filter
cartridge 24-hours a day. Large debris are filtered by jets pump #1 drawing
water through the skimmer bag and second filter cartridge during an automated
skimming/heating cycle or when jets pump 1 is manually activated during spa
use. Combined, both filters provide unsurpassed water quality by trapping
surface oils and suspended particles.
An optional chemical feeder is available through your autho-
rized Jacuzzi dealer that installs under the filter cap
(#2472-673). Always remove the chemical feeder cap and
feeder (when used) during the filter cleaning process by turning
the cap handle counterclockwise. Reinstall the cap and feeder
back onto the filter cartridge after the filter cleaning process is complete. It is
recommended that latex gloves be used to avoid touching the chemical feeder
during the filter cleaning process. Note: when used, the chemical feeder MUST
remain on the circulation pump filter cartridge! This filter
cartridge is the one with the grid across the wall fitting as shown
(right).
ALWAYS TURN POWER TO SPA OFF BEFORE CLEANING THE FILTER
CARTRIDGES! Note: Refer to steps A-J on following page for complete filter
cleaning/replacement instructions.
26