Draining And Refilling - Jacuzzi LCD Series Owner's Manual

E
top
top
Cartridge 1
Cartridge 2
Rinse debris from filter pleats on
each cartridge using a garden hose
and high-pressure nozzle. Start at
top and work downward to handle.
Repeat until all pleats are clean.
* Note: to maximize filter life, switch filter cartridge positions at each cleaning. The circulation pump's filter wall
fitting is easily identified by it's mesh grill.
Periodically, both filter cartridges will need a more thorough cleaning to
remove imbedded oils and minerals. For this, we suggest cleaning as illus-
trated above (Step E), followed by soaking the filter overnight in a plastic con-
tainer filled with a solution of water and a specially formulated filter cleanser
available from your Jacuzzi Premium dealer. We also recommend switching
your two filter cartridges during each cleaning to maximize life. The average
life expectancy of each filter cartridges is approximately two years with prop-
er care, rotation, and water quality maintenance. Replacement cartridges may
be purchased from your Jacuzzi Premium dealer.

12.2 Draining and Refilling

About every 3 to 6 months, you will want to replace the spa's water. The fre-
quency depends on a number of variables including the amount of use, atten-
tion paid to water quality maintenance, etc. You will know it is time for a
change when you cannot control sudsing and/or you can no longer get the
normal feel or sparkle to the water even though the key water balance mea-
surements are all within the proper parameters.
WARNING! READ THIS BEFORE DRAINING: To prevent damage
to the spa's components, turn off power to the spa at the circuit
breaker before draining it. Do not turn the power back on until
your spa has been refilled.
Page 32
F
(Inside Spa View)
Place each cartridge back into
*
skimmer well , then rotate each
cartridge handle clockwise to
thread back into wall fitting. DO
NOT OVERTIGHTEN!
G
(Inside Spa View)
1. Install filter cover by sliding it
down into position over mating
retainer clips.
2. Turn power to spa back on.