Table of Contents
Advertisement
DESIGNER/LUXURY BATH SERIES
INSTALLATION / OPERATION INSTRUCTIONS
Save These Instructions for Future Use.
Complete and mail-in the product registration card provided with your unit.
Write and save the model and serial number of your unit below.
Owner's Record
Date Purchased ____________________________________________________________
Purchased From ____________________________________________________________
Installed By ________________________________________________________________
Serial Number _____________________________________________________________
Model ____________________________________________________________________
Installer: Leave this manual for homeowner.
Homeowner: Read this manual and keep for future reference.
©
2005 Jacuzzi Whirlpool Bath K339000X 3/06
Advertisement
Table of Contents
Related Manuals for Jacuzzi DESIGNER BATH SERIES
Summary of Contents for Jacuzzi DESIGNER BATH SERIES
- Page 1 Write and save the model and serial number of your unit below. Owner's Record Date Purchased ____________________________________________________________ Purchased From ____________________________________________________________ Installed By ________________________________________________________________ Serial Number _____________________________________________________________ Model ____________________________________________________________________ Installer: Leave this manual for homeowner. Homeowner: Read this manual and keep for future reference. © 2005 Jacuzzi Whirlpool Bath K339000X 3/06...
-
Page 2: Safety Instructions
HYPERTHERMIA INCLUDE AN INCREASE IN THE INTERNAL TEMPERATURE OF THE BODY, DIZZI- NESS, LETHARGY, DROWSINESS AND FAINTING. THE EFFECTS OF HYPERTHERMIA INCLUDE: A) FAILURE TO PERCEIVE HEAT B) FAILURE TO RECOGNIZE THE NEED TO EXIT THE SPA OR HOT TUB, C) UNAWARENESS OF IMPENDING HAZARD, D) FETAL DAMAGE IN PREGNANT WOMEN, E) PHYSICAL INABILITY TO EXIT THE SPA OR HOT TUB, AND F) UNCONSCIOUSNESS RESULTING IN DANGER OF DROWNING. -
Page 3: Installation Instructions
NOTE: This is a professional grade product. A knowledge of construction techniques, plumbing and electri- cal installation according to codes are required for proper installation and user satisfaction. We recommend that a licensed contractor perform the installation of all Jacuzzi Whirlpool Bath products. Our warranty does not cover improper installation related problems. -
Page 4: Table Of Contents
Service Support Department at 1-800-288-4002. Visit our web site at http:// www.jacuzzi.com/ for products and services. To find service agent listings for: Electrical or Mechanical Repairs visit http://jacuzzi.com/pdf/ASA.PDF Finish, Surface, or Shell-Related Repairs visit http://jacuzzi.com/pdf/AFC.PDF Repair Parts or Accessories visit http://jacuzzi.com/pdf/MPD.PDF Jacuzzi Whirlpool Bath K339000X 3/06 CONTENTS... -
Page 5: Specifications
Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or avoided by following this inspection and testing procedure. - Page 6 FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit. RapidHeat : 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit. Motor/Pump: 120 VAC, 20 AMP, 60 Hz. dedicated GFCI protected separate circuit. Jacuzzi Whirlpool Bath K339000X 3/06 SPECIFICATIONS TOTAL WEIGHT/ OPERATING...
- Page 7 (S749000 Heater) 117 lb Not Available Factory Installed (53 kg) Intake (S749000 Heater) 130 lb Not Available Factory Installed (59 kg) Intake (S749000 Heater) 130 lb Not Available Factory Installed (59 kg) Intake (S749000 Heater) Jacuzzi Whirlpool Bath K339000X 3/06...
-
Page 8: Specifications
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit. RapidHeat : 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit. Motor/Pump: 120 VAC, 20 AMP, 60 Hz. dedicated GFCI protected separate circuit. Jacuzzi Whirlpool Bath K339000X 3/06 SPECIFICATIONS 2" (51 mm) -
Page 9: Roughing-In Reference
Access 12" H x 18" L Service Access 60" 30-1/8" Motor Heater 11-3/4" 6" 32-1/2" Opt. Service Access 12" H x 18" L Service Access 72" 30-1/8" Motor Heater 11-3/4" 6" Opt. Service 35-13/16" Access Jacuzzi Whirlpool Bath K339000X 3/06... - Page 10 2. All measurements are in inches. To convert to millimeters, multiply inches by 25.4. 3. Service access dimensions given are minimum size. 4. The overall dimensions are nominal with a tolerance of +0 and -1/4" (6,4 mm). Jacuzzi Whirlpool Bath K339000X 3/06 42" 42"...
- Page 11 3" Opt. Service Access 10-1/4" SABELLA™ Right Hand 18" 36" 6-3/4" 15-1/4" TORRETTA™ 36, Left Hand 1" 72" Motor 3" Heater 7" 36" Opt. Service Access 72" Motor 15" X 4" Heater Opt. Service Access Jacuzzi Whirlpool Bath K339000X 3/06...
- Page 12 2. All measurements are in inches. To convert to millimeters, multiply inches by 25.4. 3. Service access dimensions given are minimum size. 4. The overall dimensions are nominal with a tolerance of +0 and -1/4" (6,4 mm). Jacuzzi Whirlpool Bath K339000X 3/06 36" Access DUETTA™...
- Page 13 4. The overall dimensions are nominal with a tolerance of +0 and -1/4" (6,4 mm). ROUGHING-IN REFERENCE 60" Service Access 16" 26" Opt. 16" Service Access Motor 7-1/2" 14"x5"* 72" 5" Heater 12" H x 18" L Service Access 4" 9" 72" CORTINA™, Right Hand Jacuzzi Whirlpool Bath K339000X 3/06...
-
Page 14: Installations Instructions
STUD CAULKING FLANGE SHIM IF NECESSARY TO FILL GAPS BETWEEN 1/8" GAP STUD AND FLANGE Jacuzzi Whirlpool Bath K339000X 3/06 MORTAR OR ADHESIVE TILE SEALANT PLASTER FLANGE SUB-FLOOR FLASHING 1" X 4" (NOT FOR SUPPORT) SEMI-SUNKEN OPTIONAL TILE FLANGE KIT... -
Page 15: Service Access
(WITHOUT SKIRT) HEATER 12" 18" 12" ALTERNATE 18" MOTOR ACCESS PUMP/MOTOR HEATER 12" 18" 12" PREFERRED 18" ACCESS AREA AREA MOTOR Jacuzzi Whirlpool Bath K339000X 3/06... -
Page 16: Allusion Installation
TWO WALL INSTALLATION CUTOUT 32" THREE WALL INSTALLATION CUTOUT 32" 32" Jacuzzi Whirlpool Bath K339000X 3/06 CUTOUT 10" MINIMUM VERTICAL CLEARANCE FOR INSTALLER TO POSITION TUB CUTOUT 3" 10"... - Page 17 REFERENCE LINE APPROX. 2-1/2" SUBFLOOR ** MIN CLEARANCE - DUETTA 3"-3½" TILE OR FINISHED SURFACE SUBSTRATE TYP MIN. 1-1/2" CLEARANCE** SUBFLOOR SUPPORT MEMBER Jacuzzi Whirlpool Bath K339000X 3/06 (Motor) 1/2" FINISHED SURFACE SCRAP LUMBER 2 " MAX THICKNESS SUBSTRATE SUPPORT...
-
Page 18: Electrical Connections
Before power is applied to the installation, make sure the switch is in the OFF position to avoid pump damage. ELECTRICAL CONNECTION 20 AMP, 3 PRONG PLUG (Pump/Motor) Jacuzzi Whirlpool Bath K339000X 3/06 15 AMP, 3 PRONG PLUG (Heater) DUPLEX RECEPT.*... -
Page 19: Plumbing And Water Supply
Major scratches and gouges which penetrate the acrylic surface will require refinishing. Ask your Jacuzzi Whirlpool Bath dealer for special instructions or visit our web site at http://www.jacuzzi.com/. To find service agent listings for: Electrical or Mechanical Repairs visit http://jacuzzi.com/pdf/ASA.PDF... -
Page 20: Operating Instructions
This is a health precaution, as these baths are not designed to hold water continuously like pools or spas. If you want a unit designed to continuously hold water, see your Jacuzzi Whirlpool Bath dealer for the complete line of whirlpool spas available. -
Page 21: Electronic Control Panel Operation
General Functions This Jacuzzi tub is equipped with a seven button electronic control panel. The seven button panel controls a two speed pump/ motor, Chromotherapy or Illumatherapy levels. When switching between functions, the LED for the inactive functions will dim and the active function will brighten. - Page 22 The heater includes an exclusive High-Limit switch. This safety circuit will not false trip from hot tap water. It will only turn off the heater if the thermostat fails. To reset, press the button. If the high-limit trips frequently, contact your Authorized Electrical/ Mechanical Service Provider. Visit our web site at http://www.jacuzzi.com/. To find service agent listings for: Electrical or Mechanical Repairs visit http://jacuzzi.com/pdf/ASA.PDF...
-
Page 23: Maintenance Instructions
If Meguiar's is not available, an acrylic polish of equal quality or automotive paste wax is acceptable. Never use abrasive household cleaners on any Jacuzzi Whirlpool Bath product. Repairs to the Surface... -
Page 24: Maintenance Instructions
Lighting (Chromotherapy lighting) Your unit has Chromotherapy (LED) lighting. If the lights fail to function contact your Jacuzzi Whirlpool Bath dealer. There are no customer serviceable components on the Chro- motherapy lighting. Replacement fixtures are available from your Jacuzzi Whirlpool Bath dealer. -
Page 25: General Troubleshooting Guide
Lighting does not work NOTE: If unit is within the warranty period, contact Jacuzzi Whirlpool Bath Service Support at 1 - (800) 288-4002 with bath's serial number before work is started. The Serial Number is located on the Specification/Serial Number Plate. See page 26. -
Page 26: Authorized Service
USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT. Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. -
Page 27: Warranty
NOTICE: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. There are no warranties applicable to Jacuzzi Whirlpool Bath products except as expressly stated herein or as implied by applicable state and federal laws. The Company will not be responsible for any statements or representations made in any form that go beyond, are broader than or are inconsistent with any authorized literature or specifications furnished by the Company. -
Page 28: Warranty
In order to obtain warranty service, consult your local telephone book for the location of the nearest Jacuzzi Whirlpool Bath Authorized Service Agent. Describe the problem and the Authorized Service Agent will inspect the unit and provide the required warranty service.