Permobil K300 Owner's Manual page 142

Power wheelchairs
Hide thumbs Also See for K300:
Table of Contents

Advertisement

Owner's Manual Permobil K300/C300/C300s
L
CAUTION!
Any error signals on the indicators are not displayed while the wheelchair is being driven. They appear when it is
next started.
If any part is replaced without Permobil's approval, the wheelchair's warranty lapses. Permobil accepts no liability
for any loss that occurs as a a result of a component of the R-net control system being opened, adjusted or modified
without permission.
Permanently on
Everything is in order. The number of lamps that light up depends on the voltage remaining in the batteries. If the bat-
teries are fully charged, all the lamps light up.
Slowly flashing red lamps, 1–2 lamps
The batteries need to be charged immediately.
Rapid flashing, 1–10 lamps
A fault has been detected in the wheelchair´s electronics and the wheelchair can not be driven.
• Switch of the wheelchair.
• Check that all visible cables and the cable to the control panel are connected correctly.
• Switch the wheelchair on again. If the fault persists, count the number of flashing lamps and check for a possible
cause and remedy in the table on the adjoining page.
• Do not use the wheelchair until the problem has been remedied or you have received other information from your
service contact.
142
Troubleshooting

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C300C300s

Table of Contents