Permobil K300 Owner's Manual page 100

Owner's Manual Permobil K300/C300/C300s
Releasing the brakes
1. Switch off the wheelchair with the On/Off key on the control panel.
2. Press the release control back and, at the same time, pull it out from the
chassis. See the picture. The chair can now be moved manually.
Resetting released brakes
1. Push the release control back into the chassis.
L
WARNING!
Anyone who pushes a wheelchair with the brakes released must ensure
that this is done safely without risks.
Always reset the brake release after moving the wheelchair manually.
When the brakes are released, it should not be possible to drive the chair.
If the chair can still be driven, contact your service contact or Permobil
immediately.
100
Figure 92. Resetting released brakes
Handling