Table of Contents
Advertisement
Function of KCA-BT200 (Optional Accessory)
Bluetooth Setup
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Select Bluetooth device deletion mode
>
Select "MENU"
"Device Delete" ("DVC-DEL").
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Bluetooth device deletion mode
Press the Control knob for at least 1 second.
"(name)" is displayed.
3
Select the Bluetooth device
Turn the Control knob.
4
Delete the selected Bluetooth device
When connecting to KOS-D210:
Press the Control knob.
"Delete?" is displayed.
When not connecting to KOS-D210:
Press the Control knob for at least 1 second.
"Delete" is displayed.
5
Turn the Control knob to select "YES", and then
press the Control knob. (When connecting to
KOS-D210)
"Delete" is displayed.
6
Exit Bluetooth device deletion mode
Press the [FNC] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1
Enter Bluetooth Firmware update mode
>
Select "MENU"
"BT F/W Update" ("BT FW UP").
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second.
The firmware version appears.
3
Exit Bluetooth Firmware update mode
Press the [FNC] button.
⁄
• For how to update the firmware, access our web site.
http://www.kenwood.com/bt/information/
22
|
KOS-A210
Autogood products internet store http://130.com.ua
Adding a voice dialing command
Add a voice tag to the phonebook for voice dialing.
You can register up to 35 voice tags.
1
Select Phonebook name edit mode
>
Select "BT"
"Voice Tag" ("VOICETAG")
Name Edit" ("NAME EDT").
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Phonebook name edit mode
Press the Control knob.
3
Search for the name to register
Select the name to register with reference to 4 in
<Calling a number in the Phone Book> (page 17).
If a voice tag has already been registered for a
name, "*" is displayed before the name.
4
Select a mode
Turn the Control knob.
Display
"PB Name Regist" ("NAME REG")
"PB Name Check" ("NAME CHK")* Play a voice tag.
"PB Name Delete" ("NAME DEL")* Delete a voice tag.
"Return" (RETURN")
* Displayed only when a name for which a voice tag has
been registered is selected.
Select "PB Name Regist" ("NAME REG") (Regist)
5
Register a voice tag (first)
Press the Control knob.
"Enter Voice 1" ("ENTER 1")is displayed.
When a beep is heard, speak a voice tag within 2
seconds.
6
Confirm the voice tag (second)
Press the Control knob.
"Enter Voice 2" ("ENTER 2") is displayed.
When a beep is heard, speak the same voice tag
that was spoken in step 5 within 2 seconds.
"Completed" ("COMPLETE") is displayed.
7
End registration
Press the Control knob.
Return to step 2. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Refer to <Troubleshooting Guide> (page 37).
Pressing the Control knob allows you to retry voice input.
>
"PB
Operation
Register a voice tag.
Return to step 2.
Advertisement
Table of Contents
