Table of Contents
Advertisement
Favorite Name Setting
Giving a name to Preset Memory registered to
Favorite.
1
Enter Favorite Preset Recall mode
Select "FAV".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Retrieve the Favorite memory to change
Turn the Control knob.
3
Enter Favorite Name set mode
Press the Control knob for at least 1 second.
Select the "FAVORITE NAME SET" display.
4
Enter the name
Operation type
Move the cursor to the enter
character position
Select the character type*
Select the characters
* Each time you press the knob, the character type
alternates between the types shown in the table below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
5
Exit Favorite Name Set mode
Push the Control knob towards right or left
to select "ENTER", and then press the Control
knob.
Cancelling the Favorite Name set
Press the [FNC] button.
Operation
Push the Control knob towards right
or left.
Press the Control knob.
Turn the Control knob or push it
towards up or down.
Autogood products internet store http://130.com.ua
Input/Output Setting
Input Level Adjust
Adjusts the USB I/F and AUX input level.
1
Select Input Level Adjust mode
>
Select "MENU"
"Input Level ADJ" ("INPUT LV").
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Input Level Adjust mode
Press the Control knob for at least 1 second.
3
Adjust the Input Level
Turn the Control knob.
4
Exit Input Level Adjust mode
Press the [FNC] button.
Transmission Frequency Setting
Setting the transmission frequency.
1
Select Transmission Frequency Setting mode
>
Select "MENU"
"TransmissionFREQ" ("FREQ").
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter Transmission Frequency Setting mode
Press the Control knob for at least 1 second.
3
Select the transmission frequency
Turn the Control knob.
4
Determine the transmission frequency
Press the Control knob for at least 1 second.
"*" is displayed on the confirmed transmission
frequency.
5
Exit Transmission Frequency Setting mode
Press the [FNC] button.
15
|
English
Advertisement
Table of Contents
