Lake LM 26 Operation Manual page 37

The Frame Menu provides information and options relating to the LM 26 as a physical unit. It is referred to
as a Frame for consistency with Lake Controller terminology.
6.10.4.1 Frame Info
MENU > FRAME > FRAME INFO
Frame Info provides information about the device settings and configuration. All data in this front panel
menu is read-only; some parameters are fixed, some can be changed only via the Lake Controller software.
Frame Label
The Frame Label as defined in the Lake Controller is displayed in this menu. It is also displayed at the
top-left of the screen in Meter Mode, Home View.
Serial Number (Serial No.)
The printed serial number on the back panel of the LM 26 is also electronically embedded in the hardware,
and therefore cannot be removed or altered if stolen.
Network
Pressing the NETWORK button displays a further screen containing network configuration information.
All parameters are view-only on the front panel and are either not editable, or can only be adjusted via the
Lake Controller.
A summary at the top right of the screen confirms whether a valid connection is present for both Ethernet
ports, and whether the Lake Controller is online.
▸ IP Addr: Displays the Internet Protocol address for the selected unit and can only be changed via the
Lake Controller software. Please refer to the Lake Controller Operation Manual for further details.
▸
IP Mask: Displays the IP address subnet mask for the selected unit and can only be changed via the
Lake Controller software. Please refer to the Lake Controller Operation Manual for further details.
▸
MAC: Displays the unique Media Access Control Ethernet address for the processor. This value cannot
be changed.
▸
F.ID: Displays the Frame ID, a unique Lake product identifier that cannot be changed.
Front Panel Interface
LM 26 Operation Manual rev 1.2.3
31