Lake LM 26 Operation Manual page 36

Front Panel Interface
Press this button to move the cursor upwards
Press this button to move the cursor downwards
This section of the screen displays the selected audio source
This section of the screen displays the selected output destination type
This section of the screen displays the channels for the selected audio source
This section of the screen displays the output routing configuration
Press this button to scroll through the available output destination types
Press this button to move the cursor to the left
Press this button to move the cursor to the right
Use the rotary encoder to toggle the selected routing point ON or OFF
Use the above function keys to navigate to the required audio source and output destination, then move the
cursor to a routing point and adjust using the rotary encoder.
▸ 'X' identifies a connected routing point
▸ 'O' identifies a currently unused and available routing point
-
▸
' ' identifies that routing is unavailable for this routing point, normally because another audio channel is
already routed to the output.
All three states are shown in inverse video when they are selected by the cursor.
6.10.4 Frame Submenu
MENU > FRAME
30
LM 26 Operation Manual rev 1.2.3
Figure 6-17: Frame Menu