Front Panel Key Lock; Power Button; Meter Button - Lake LM 26 Operation Manual

1. Ensure Meter Mode is selected
2. Press the button adjacent to the Module description on the LCD
If the Frame is online, but the Module is not in the work area, the selected Module will be centred on the
Module scroll bar (assuming the Modules Menu is selected in the Lake Controller).
6.2

Front Panel Key Lock

It is possible to lock the front panel buttons for security purposes. When this function is active, all front
panel controls are disabled and all adjustment must be made via the network. To lock controls, press and
hold button then simultaneously press button
6.3

Power Button

The unit is powered on by pressing the left-most button on the front panel, labelled
a bi-color power symbol which illuminates red when connected to the AC mains and the unit is in standby
mode. It turns green when the button is pressed to turn the processor on. A subsequent press of this
button returns the unit to standby mode.
6.4

Meter Button

The front panel display has two main operating modes, Meter Mode (default) and Menu Mode. In normal
operation, the display will be in Meter Mode.
There are two views available in Meter Mode: Home View (default) and I/O Status View. Pressing the
METER button toggles between these views. Pressing the METER button when in Menu Mode will
return the system to Meter Mode, with the Home View displayed. Please refer to section 6.9 for further
information.
as shown in Figure 6-2; repeat this process to unlock.
Figure 6-2: Locking / Unlocking Front Panel Controls
Front Panel Interface
in Figure 6-1. It has
LM 26 Operation Manual rev 1.2.3
15