Lake LM 26 Operation Manual page 30

Front Panel Interface
The top left button labeled PAGE toggles between the input mixer gain settings for each Module in the
Frame. Press any other illuminated button to select a parameter for editing then use the rotary encoder to
make adjustments. Multiple parameters may be selected and adjusted together.
6.10.2.2 Gain
MENU > MODULE > GAIN
For frames where both Modules have four output channels or less, a detailed parameter screen as shown
in Figure 6-10 is displayed. Where Module A has five output channels or more, the combined summary edit
screen shown in Figure 6-11 is the only screen available.
Pressing the top left PAGE button scrolls between the following three views for modules with four output
channels or less:
1. Module A Input and Output Gain Settings (with Group totals)
2. Module B Input and Output Gain Settings (with Group totals)
3. Module A & B Combined Summary (without Group totals)
Pressing any other illuminated button on any of these three screens allows direct editing of the Module
parameter using the rotary encoder.
24
LM 26 Operation Manual rev 1.2.3
Figure 6-10: Single Module Gain Edit Screen
Figure 6-11: Module A+B Combined Gain Summary Edit Screen