Installing The Cover Over The Speaker/Microphone Jacks; Installing The (Optional) Speaker/ Microphone - Kenwood FreeTalk XL Instruction Manual

Installing the Cover over the Speaker/ Microphone Jacks
If you are not using a
speaker/ microphone, install
the cover over the speaker/
microphone jacks using the
supplied 3 x 6 mm screw.
Note: To keep the transceiver water
resistant, you must cover the
speaker/ microphone jacks with the
supplied cover.

Installing the (Optional) Speaker/ Microphone

1 Insert the speaker/
microphone plugs into the
speaker/ microphone
jacks.
2 Attach the locking bracket
using the supplied
3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
Speaker/
microphone
jack cover
Speaker/
microphone
locking bracket
5