Installing The Cover Over The Speaker / Microphone Jacks; Installing The Optional Speaker / Microphone ( Or Headset ); Microphone (Or Headset) - Kenwood TK 3200U2P - Protalk UHF - Radio Instruction Manual

I
NSTALLING THE
I
NSTALLING THE
1
2 2
8
C
OVER OVER THE
If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks
using the supplied 3 x 6 mm screw.
Note: To keep the transceiver
water resistant, you must cover the
speaker/ microphone jacks with the
supplied cover.
O S
PTIONAL PEAKER
Insert the speaker/ microphone
(or headset) plugs into the speaker/
microphone jacks.
Note: Always switch OFF the
transceiver power when installing
or removing a speaker/ microphone
or headset.
Attach the locking bracket using
the supplied 3 x 6 mm screw.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
S / M
PEAKER ICROPHONE
/ M
ICROPHONE
J
ACKS
( H )
OR EADSET