I
NSTALLING THE
I
NSTALLING THE
1
2
8
C
OVER OVER THE
If you are not using a speaker/
microphone, install the cover over
the speaker/ microphone jacks
using the supplied 3 x 6 mm screw.
Note: To keep the transceiver
water resistant, you must cover the
speaker/ microphone jacks with the
supplied cover.
O
S
PTIONAL
PEAKER
Insert the speaker/ microphone
(or headset) plugs into the
speaker/ microphone jacks.
Attach the locking bracket using
the supplied 3 x 6 mm screw.
S
/ M
PEAKER
/ M
ICROPHONE
Note: Always switch OFF the
transceiver power when installing
or removing a speaker/ microphone
or headset.
Note: The transceiver is not fully
water resistant while using the
speaker/ microphone.
J
ICROPHONE
ACKS
(
H
OR
EADSET
)