Installing The Cap Over The Speaker/Microphone Jacks; Installing The Optional Speaker/ Microphone - Kenwood NX-200-K Instruction Manual

NX-200-K, NX-200-K2, TK-5220-K, TK-5220-K2
FCC ID: ALH378400
IC: 282D-378400

Installing the Cap over the Speaker/Microphone Jacks

If you are not using an optional KMC-25 speaker/ microphone, install the cover over the univeral connector using the
supplied 4 x 6 mm screw.

Installing the Optional Speaker/ Microphone

1 Insert the guide of the speaker/ microphone connector into the groove of the universalconnector.
2 Secure the connecter in place using the attached screw.