Konica Minolta bizhub 751 User Manual page 283

Administrator mode settings
Closed Network RX
% Specify whether or not the Closed Network RX function is used. To enable the function, specify the
password for closed RX operations. Touch [No] to make it ready for input, and enter a password using
the keypad (within 4 digits).
!
Detail
The closed RX function can only be used when the sender machine is a model with a password
function.
Forward TX Setting
A received document can be forwarded to a preset recipient. The following items should be specified.
Item
Output Method
Forward Dest.
Select Line
bizhub 751/601 (Version 2)
Description
Forward & Print: The received document is forwarded and also printed on this machine.
Forward & Print (If TX Fails): The received document is forwarded, and it is printed on the ma-
chine if the forwarding operation fails.
Enter the fax number of the destination within 38 digits. It is also possible to select from the
Address Book.
If 2 units of the fax kit are installed, the forwarding line can be specified.
10
10-35