System Settings - Stamp Settings - Fax Tx Settings; System Settings - Reset Settings - Job Reset - Next Job - Reset Data After Job; System Settings - Skip Job Setting - Fax - Konica Minolta bizhub 751 User Manual

Administrator mode settings
10.4.4

System Settings - Stamp Settings - Fax TX Settings

% Specify whether or not the stamp setting is canceled when a fax is sent.
!
Detail
When "Cancel" is selected, the fax transmission original page is transmitted without applying the stamp
setting.
When "Do Not Cancel" is selected, the stamp setting is applied also to the fax transmission original
page.
10.4.5

System Settings - Reset Settings - Job Reset - Next Job - Reset Data After Job

For the setting procedure, refer to "System Settings - Reset Settings - Job Reset - Next Job - Reset Data
After Job" on page 10-15.
10.4.6

System Settings - Skip Job Setting - Fax

% When the machine has run out of paper to print the receiving document or when the paper output tray
reaches the maximum load, specify whether the skip of the receiving job is permitted.
bizhub 751/601 (Version 2)
10
10-19