SMART Board Board E70 User Manual page 31

C H A P T E R 4
Troubleshooting your interactive flat panel
2. Click Setup Windows displays the following page; select Touch input.
3. Windows displays the following page on your first display:
4. If necessary, press Enter until the page is displayed on your touch screen.
5. Tap your touchscreen two or three times until the text changes.
6. Press enter to skip through any remaining screens until the window closes.
N O T E
Do not touch any further touch screens as the correct association between the selected
monitor and touch screen will be lost.
7. Click OK.
I M P O R T A N T
If you have difficulty with the above procedure, set up your E70 as the primary monitor (or main
display) and try again. You can switch your main display back to its original setting after you
have successfully identified the E70 as your touch screen.
25 smarttech.com/kb/170534