Elo TouchSystems 1519LM User Manual page 5

Caution
• Power cord is used as a disconnection device. To de-energize equipment, disconnect the
power cord.
• This unit must follow the national requirement and local state laws to dispose unit.
• Before connecting the cables to your Elo touchmonitor, make sure all components are
powered OFF.
Only approved components complying with IEC60601-1 series can be connected to
ET1519/
not complying with
to a reduced safety of the
resulting system. Consideration relating to the choices of accessory equipment should
include:· Use of accessory in the patient environment.· Evidence that the safety
certification of the accessory has been performed in accordance to the appropriate
IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard.
• For continued safety -
- This unit only complies to the above standards if used with a medical grade power cord.
-A medical grade power supply, such as the one specified, is required for use in a medical
application.
Note:
!
• This symbol alerts the user to important information concerning the operation and
maintenance of this unit, which should be read carefully to avoid problems.
• This symbol means DC Current.
• This symbol means ON/OFF stand-by switch.
1919LM in Patient Environment. The use of ACCESSORY equipment
the equivalent safety requirements of this equipment may lead
v