Table of Contents
Advertisement
Installing the Serial Touch Driver (not applicable to Acoustic
Pulse Recognition monitor)
Installing the Serial Touch Driver for Windows 7, Windows Vista,
Windows XP, Windows 2000, ME, 95/98 and NT4.0.
NOTE: For Windows 2000 and NT4.0 you must have administrator access rights to install the driver.
Make sure the serial connector (RS232) is plugged into the monitor and an open com port on
the PC.
1 Insert the Elo CD-ROM in your computer's CD-ROM drive.
2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects
3 Follow the directions on the screen to complete the driver setup for your version of
4 If the AutoStart feature is not active:
5 Click Start > Run.
6 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
7 Click Open, then OK to run EloCd.exe.
8 Follow the directions on the screen to complete the driver setup for your version of
the CD and starts the setup program.
Windows.
Windows.
2-8
Advertisement
Table of Contents
