Installing The Serial Touch Driver (Not Applicable To Acoustic Pulse Recognition And Intellitouch Plus Monitor); Installing The Serial Touch Driver For Windows 7, Windows Vista, Windows Xp, Windows 2000, Me, 98/95 And Nt4.0 - Elo TouchSystems 1937L User Manual

Installing the Serial Touch Driver (not applicable to Acoustic
Pulse Recognition and IntelliTouch Plus monitor)
Installing the Serial Touch Driver for Windows 7, Windows Vista,
Windows XP, Windows 2000, ME, 98/95 and NT4.0.
NOTE: For Windows 2000 and NT4.0 you must have administrator access rights to install the driver.
Make sure the serial connector (RS232) is plugged into the monitor and an open com port on the PC.
1 Insert the ELO CD-ROM in your computer's CD-ROM drive.
2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects
the CD and starts the setup program.
3 Follow the directions on the screen to complete the driver setup for your version of
Windows.
4 If the AutoStart feature is not active:
5 Click Start > Run.
6 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
7 Click Open, then OK to run EloCd.exe.
8 Follow the directions on the screen to complete the driver setup for your version of
Windows.
3-6