Troubleshooting - Pentax 645D Operating Manual

e_kb487.book Page 94 Wednesday, December 8, 2010 9:49 AM

Troubleshooting

In rare cases, the camera may not operate correctly due to
static electricity. This can be remedied by taking the battery out
and putting it back in again. When the mirror remains in the up
position, take the battery out and put it back in again. Then, the
mirror will retract when the camera is turned on again. If, after
performing these procedures, the camera operates correctly, it
does not require any repairs.
We recommend checking the following items before contacting
a service center.
Problem Cause
The battery is not
installed
The camera does
6 not turn on
The battery power is
low
There is no
available space on
The shutter will
the SD Memory
not release
Card
Recording
The USB
The USB
connection with a
connection mode is
computer does not
set to [PTP]
work properly
94
Remedy
Check if the battery is installed.
Replace with a charged battery
or use the AC adapter kit K-
AC50 (optional).
Insert an SD Memory Card with
available space or delete
unwanted images. Also check
the file format settings for the
SD1 and SD2 slots.
Wait until recording is finished.
Set [USB Connection] in the
[R2] menu to [MSC].
(z p.R25)