Digital Filters; Applying The Digital Filter - Pentax 645D Operating Manual

e_kb487.book Page 76 Wednesday, December 8, 2010 9:49 AM

Digital Filters

You can process images with digital filters.
The following filters are available.
Filter name Effect
Creates a
Monochrome
monochrome image.
4
Extracts a specific
color and makes the
Extract Color
rest of the image
black and white.
Adds a color filter to
Color
the image.
Base Adjusts the
Parameter parameters to create
Adj the desired image.
Creates an image
with a soft focus
Soft
throughout the
image.
Caution
• Only JPEG and RAW images captured with this camera can be
edited using the digital filters.
76
Parameter
Filter Effect: OFF/Red/Green/Blue/
IR (Infrared Filter)
Toning (B-A): 7 levels
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Freq. Range: –2 to +2
Color: Red/Magenta/Blue/Cyan/
Green/Yellow
Color Density: Light/Standard/Dark
Brightness: ±8 levels
Saturation: ±3 levels
Hue: ±3 levels
Contrast: ±3 levels
Sharpness: ±3 levels
Soft Focus: +1/+2/+3
Shadow Blur: OFF/ON

Applying the Digital Filter

1
Select an image for applying the digital filter and
then select D (Digital Filter) in the playback mode
palette.
2
Use the 23 keys to select a
filter and press the 4
button.
You can check the filter effect on the
screen.
You can also use the R dial to
select a different image.
3
Use the 23 keys to select
the parameter, use the 45
keys to adjust the value, and
press the 4 button.
4
Select [Use filters in combination] or [Save as].
The image is saved.
To apply additional filters to the same image, select [Use filters in
combination] and repeat Steps 2 to 4.
Memo
• You can apply up to 10 filters to the same image.
100-0001 100-0001
1
Monochrome Monochrome
MENU Exit Exit OK OK OK
1 100-0001 100-0001
Red Red
MENU OK
Example: Color Filter