Display Indicators; Monitor - Pentax 645D Operating Manual

e_kb487.book Page 14 Wednesday, December 8, 2010 9:49 AM
1
Button and Dial Operations
You can operate both a button and e-dial, such as m and S or
] and R, to change the settings using either of the following
methods.
Operation
Turn the dial while pressing the
button.
Press the button, take you finger
off the button, and then turn the
dial.
Hereafter, this Operating Manual explains by using the "Turn the
dial while pressing the button" operation.
14
Confirming the Setting
Take your finger off the button.
Press the button again or wait
until the meter operating timer
goes off.

Display Indicators

Monitor

The following indicators appear on the monitor depending on
the status of the camera.
Memo
• You can adjust the brightness and color of the monitor with
[Brightness Level] and [LCD Color Tuning] in the [R2] menu.
(z p.R24 - p.R25)
At Start-up or when Operating the Mode
Dial
Guide indicators appear on the monitor for 3 seconds (default
setting) when the camera is switched on or the mode dial is
turned.
Memo
• To turn off the guide indicators, set [Guide Display] to [Off] in the
[R1] menu. (z p.R24)
P
Program
1
Automatic Exposure
JPEG RAW
RAW 1 2
2
MODELING
AF Cancel AF
05/05/2010
3 4
Tv
Av
P
10:30AM